Particle swarm optimization-based stator resistance observer for speed sensorless induction motor drive

This paper presents a different technique for the online stator resistance estimation using a particle swarm optimization (PSO) based algorithm for rotor flux oriented control schemes of induction motor drives without a rotor speed sensor. First, a conventional proportional-integral controller-based stator resistance estimation technique is used for a speed sensorless control scheme with two different model reference adaptive system (MRAS) concepts. Finally, a novel method for the stator resistance estimation based on the PSO algorithm is presented for the two MRAS-type observers. Simulation results in the Matlab/Simulink environment show good adaptability of the proposed estimation model while the stator resistance is varied to 200% of the nominal value. The results also confirm more accurate stator resistance and rotor speed estimation in comparison with the conventional technique

An Improved Current-Sensorless Method for Induction Motor Drives Applying Hysteresis Current Controller

A novel strategy based on the feed-forward field-oriented control (FOC) method is proposed for the Hysteresis Current technique to control the induction motor (IM) drive without current sensors (CSs). A control scheme is proposed to estimate stator currents from reference rotor flux, rotor flux angle, and state variables as a replacement for the feedback-signal of CSs used in the hysteresis current controller (HCC). Here the rotor flux angle component is extracted from the feed-forward FOC loop. MATLAB/Simulink is applied to implement the simulations under many different operating conditions. The simulation results demonstrated the feasibility of the proposed method to obtain high performance in controlling the IM drives without the current sensors

Pulse-width modulation direct torque control induction motor drive with Kalman filter

The paper deals with application of Kalman filter in induction motor drive using pulse-width modulation direct torque control (PWM-DTC). In the first part, the conventional PWM-DTC drive is described and Kalman filter is utilized to filter components of stator current vector those are assumed to be disturbed by white noise. The second part contains simulation results that are obtained in different cases of load torque, process and measurement noise covariances. The integral time absolute error (ITAE) performance index, undershoot, ripple of important quantities are used to compare the conventional drive structure and proposed drive structure with Kalman filter. The simulation results confirm the expected dynamic response of the proposed structure

A robust diagnosis method for speed sensor fault based on stator currents in the RFOC induction motor drive

A valid diagnosis method for the speed sensor failure (SSF) is an essential requirement to ensure the reliability of Fault-Tolerant Control (FTC) models in induction motor drive (IMD) systems. Most recent researches have focused on directly comparing the measured and estimated rotor speed signal to detect the speed sensor fault. However, using that such estimated value in both the fault diagnosis and the controller reconfiguration phases leads to the insufficient performance of FTC modes. In this paper, a novel diagnosis-technique based on the stator current model combined with a confusion prevention condition is proposed to detect the failure states of the speed sensor in the IMD systems. It helps the FTC mode to separate between the diagnosis and reconfiguration phases against a speed sensor fault. This proposed SSF diagnosis method can also effectively apply for IMs’ applications at the low-speed range where the speed sensor signal often suffers from noise. MATLAB/Simulink software has been used to implement the simulations in various speed ranges. The achieved results have demonstrated the capability and effectiveness of the proposed SSF method against speed sensor faults

Terahertz Active Photonic Crystals for Condensed Gas Sensing

The terahertz (THz) spectral region, covering frequencies from 1 to 10 THz, is highly interesting for chemical sensing. The energy of rotational and vibrational transitions of molecules lies within this frequency range. Therefore, chemical fingerprints can be derived, allowing for a simple detection scheme. Here, we present an optical sensor based on active photonic crystals (PhCs), i.e., the pillars are fabricated directly from an active THz quantum-cascade laser medium. The individual pillars are pumped electrically leading to laser emission at cryogenic temperatures. There is no need to couple light into the resonant structure because the PhC itself is used as the light source. An injected gas changes the resonance condition of the PhC and thereby the laser emission frequency. We achieve an experimental frequency shift of 10−3 times the center lasing frequency. The minimum detectable refractive index change is 1.6 × 10−5 RIU

Measurement of differential cross sections for top quark pair production using the lepton plus jets final state in proton-proton collisions at 13 TeV

National Science Foundation (U.S.

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Search for heavy resonances decaying to two Higgs bosons in final states containing four b quarks

A search is presented for narrow heavy resonances X decaying into pairs of Higgs bosons (H) in proton-proton collisions collected by the CMS experiment at the LHC at root s = 8 TeV. The data correspond to an integrated luminosity of 19.7 fb(-1). The search considers HH resonances with masses between 1 and 3 TeV, having final states of two b quark pairs. Each Higgs boson is produced with large momentum, and the hadronization products of the pair of b quarks can usually be reconstructed as single large jets. The background from multijet and t (t) over bar events is significantly reduced by applying requirements related to the flavor of the jet, its mass, and its substructure. The signal would be identified as a peak on top of the dijet invariant mass spectrum of the remaining background events. No evidence is observed for such a signal. Upper limits obtained at 95 confidence level for the product of the production cross section and branching fraction sigma(gg -> X) B(X -> HH -> b (b) over barb (b) over bar) range from 10 to 1.5 fb for the mass of X from 1.15 to 2.0 TeV, significantly extending previous searches. For a warped extra dimension theory with amass scale Lambda(R) = 1 TeV, the data exclude radion scalar masses between 1.15 and 1.55 TeV

Measurement of the top quark mass using charged particles in pp collisions at root s=8 TeV

Peer reviewe

Search for supersymmetry in events with one lepton and multiple jets in proton-proton collisions at root s=13 TeV

Peer reviewe